TLVP - Trivial LVP programmer
Description
Get info regarding this programmer at http://www.finitesite.com/d3jsys/.
Schematics / Layouts
Showing posts with label PIC parallel port programmer. Show all posts
Showing posts with label PIC parallel port programmer. Show all posts
Friday, 21 October 2011
Tait Classic PIC Programmer - (c) David Tait
Tait Classic PIC Programmer - (c) David Tait
Description
The Tait Classic PIC Programmer was designed by David Tait. It is a High-Voltage Programmer which is connected to the PC via the parallel port (LPT port).
Schematics / Layouts
PICPgm LVISP
PICPgm LVISP (Low-Voltgage, In-System Programmer)
Description
PICPgm LVISP is a Low-Voltgage, In-System Programmer. It is conneteced to the PC via the parallel port (LPT port).
Note: The +5V supply for the programmer is take from the target board (via +5V pin on the programmer cable), i.e. the target board has to be powered to allow programming.
Schematics / Layouts
PIC circuit for usage with LVISP programmer
To be able to use the LVISP progammer, the following minimum PIC circuit is necessary on your target board. Please not that the PGM pin of the PIC cannot be used in case Low-Voltage programming is used. This pin must always be tied to GND for proper operation!
Pictures
The Low-Voltage Programmer is very small. It fits into a Sub-D connector box: Here is a picture of the complete Low-Voltage Programmer cable:
Subscribe to:
Posts (Atom)
