Monday, 20 February 2012
LED Cube 8x8x8
8x8x8 LED Cube
Here we are going to see a wonderful led cube and its awesome displays
Minty JDM PIC Programmer
Minty JDM PIC Programmer
Parts list
1) DB9 Female Serial port connector w/ at least a 5 wire cable attached
(1) Cable with 5 wires and a connector to connect to PIC circuit
(1) 1.5K Ohm Resistor
(1) 10K Ohm Resistor
(4) 1N4148 Diodes
(1) 8.2V Zener Diode
(1) 5.1V Zener Diode
(2) BC547 Transistors
(1) 22uF Tantalum Capacitor
(1) 100uF Electrolytic Capacitor
(1) Small Prototype Board
(1) Small Mint Tin
(1) Cable with 5 wires and a connector to connect to PIC circuit
(1) 1.5K Ohm Resistor
(1) 10K Ohm Resistor
(4) 1N4148 Diodes
(1) 8.2V Zener Diode
(1) 5.1V Zener Diode
(2) BC547 Transistors
(1) 22uF Tantalum Capacitor
(1) 100uF Electrolytic Capacitor
(1) Small Prototype Board
(1) Small Mint Tin
- Soldering Iron and Solder
- Wire Strippers
- Multimeter (for checking connections)
Schematic
Assebling
place in a tin
Testing
The above programmer can be used with the PICpgm programmer and it can be downloaded from here
DON!!!!!!!!!!!!
Subscribe to:
Posts (Atom)